The photograph is of a corner. Dark brown leather, a rounded edge, and two rows of brown stitching that run side by side down both sides, with a third seam cutting across the panel at a right angle. I double stitch the corners of a briefcase on purpose.
Marcellino NY Briefcase Maker on YouTube: HAND STITCHING VS RIVETS – For English Bridle Leather Briefcases.

Why the corner
A briefcase opens and closes thousands of times, and it hangs from the handle with the weight of whatever is inside. The stress does not spread evenly. It collects at certain points: the corners of a flap, the ends of a seam, the spots where the leather folds. Those are the stress points, and over the years the briefcase will open at them first if nothing has been done.
So I put extra stitching there. In the photograph the corner has two parallel rows plus the cross seam. That is not decoration.
Stitches, not rivets
I see a lot of makers set rivets at the stress points. Rivets are strong and I use them in other places, but I do not like how they look on a briefcase for a person who wears a suit. In my video on this I say double hand stitching holds as well and looks better, and that a machine-sewn bag leans on rivets because a machine seam is not as reliable.
The thread matters. I use a strong bonded nylon thread and I have tested it. The stitch is a saddle stitch, with a needle on each end of the thread, so if one stitch fails the rest of the line stays tight.



What the edge-on photograph shows
The third photograph lays the panel flat and looks at it from the edge. Layers of leather sit in a stack with the stitch line running through. In the fourth, a hand holds the panel folded back, and the fold shows a dark interior.
Whatever the leather, the stitch is what holds the layers together as the panel flexes.
How to check a bag
Look at the corners of the flap first. A popped stitch there is where a briefcase begins to fail. In my video I show how to test for a popped thread, by pressing along the seam and feeling whether the thread sits tight in the hole.
A corner with two rows costs time. I do it anyway, because the corner is where the briefcase gets tested first.
Sources
- Marcellino NY Briefcase Maker, HAND STITCHING VS RIVETS – For English Bridle Leather Briefcases: https://www.youtube.com/watch?v=EnuUpxMN8QQ




