What Thread Size Goes With What Leather
Thread size for hand-stitched leather depends on the hole as much as the hide. Six common questions answered, from spool numbers to wallets, belts and bags.
-
-
Choosing an Edge Beveler
Choosing an edge beveler in the order the work happens: measure the leather, decode sizes that differ by maker, pick a profile, test it, then keep it sharp.
-
Re-Dyeing a Scuffed Corner
The case for re-dyeing a scuffed leather corner: dye goes into the fiber where cream sits on top. Then the catch: dye is permanent, and patina keeps moving.
-
A Card Wallet With One Seam
A leather card wallet cut from one piece, folded on one side and closed with a single saddle-stitched seam. Materials, sizing from the card, and the weak point.
-
Fitting a Lock to a Case Without Misalignment
A briefcase lock goes wrong in small ways: a mark a hair off, an opening cut too big, a pin peened loose. Here is each step and how it fails if you rush it.
-
Rounding Corners Cleanly
Corner punches, strap end punches, washers and a sharp knife all round a leather corner. Here is what each tool does well, where it fails, and what to buy.
