Rows of Engraved Lock Plates: Blackened, Then Polished

Marcellino Workshop / Rows of Engraved Lock Plates: Blackened, Then Polished
Grid of dark blackened metal lock plates engraved JP Marcellino Co New York, each with raised post heads and a small blue-lit hole
0 Comments

The first photograph is a grid. Dark metal plates in tight rows, each engraved with my name and New York, and each with raised posts and a small hole. The second and third photographs show the same kind of plates polished bright. Same plates, two finishes.

Marcellino NY Briefcase Maker on YouTube: Hampton Combination Clock Lock in Palladium From Marcellino NY.

Grid of dark blackened metal lock plates engraved JP Marcellino Co New York, each with raised post heads and a small blue-lit hole
The photograph this post is based on: a batch of blackened plates with the Marcellino name engraved across each one.

One plate, two finishes

In the dark batch the metal has been blackened, and the engraving catches the light as a thin line. In the polished batch the plates are mirror bright, and the posts show brass-colored stacks around each hole. The file names call it a block lock, and I read the photographs as showing the front plates and posts of the lock hardware.

I cannot see from the photographs alone which finish is which plating or what the base metal is, so I will not guess. What matters is the choice between them.

Why finish matters on hardware

In my videos I talk about cheap locks made of tin and painted to look like brass. They look fine until the lock is worked hard. Solid brass is the same metal all the way through, and a plated finish is a skin over the metal.

I describe the Italian locks I use as solid brass with a palladium coating, and I say nickel and zinc finishes are the cheaper ones. Palladium is the finish on the clock lock video linked above.

Dark or bright

A blackened plate disappears into black leather and gives a quiet look on a dark bag. A polished plate throws light and draws the eye to the lock. Neither is better. They answer different bags.

On leather that will patina, brass and nickel also change. A bright plate dulls with handling, and the dull edges tell on the bag the way a worn hand tells on a tool.

Marking the hardware

The engraving across each plate reads JP Marcellino Co, New York. It is cut into the metal itself, not printed on a tag.

Sources


Leave a Reply